Steam Depot Enterprises, LLC

Macon Controls ENTL-8M Remote Sensor Thermostat Non-Electric Operator

Macon Controls ENTL-8M Remote Sensor Thermostat Non-Electric Operator Macon Controls ENTL-8M Remote Sensor Thermostat Non-Electric Operator

The sensor is wax-filled and the wax volume varies according to ambient temperature. The volume changes are transmitted to the valve stem via a liquid capillary system. The valve body has a return spring which closes the valve when the stem is under low pressure. When the force from the sensor and the return spring are balanced to the room temperature selected, the valve disc stops in that position to allow a certain amount of water or steam to flow through the valve. Temperature changes cause the valve disc to change position and thereby continuously modulate the flow so that the room temperature is maintained at the desired temperature. The unit is secured against damage from over pressure by a pressure absorbing spring.



    * Fits all Macon NT series valves
    * Combined remote dial/sensor
    * Fiberglass valve plug shaft
    * Stainless steel capillary tube
    * Separate Remote Mounted Sensor and Dial, 26' Dial + 6'6" Capillaries
    * Brass sensor, High sensitivity
    * Fully automatic non-electric, no wiring
    * Each sensor is tested and re-checked to achieve exact settings before leaving the factory
    * Changing the actuator can be accomplished without draining the system
    * Macon thermostats can be locked at or limited to a specific temperature or temperature range
    * Manufactured to exacting standards using exceptionally high quality materials
    * Sensor guard furnished at no extra cost
    * All Macon valves and thermostats conform to ASHRAE Standard 102P-1983 and European Standard EN 215/1215. We are also ISO 9001 certified (2002) and ISO 14001 certified (2002).


Specification Sheet
In stock
Price: $160.41




Portions copyright 2009-2017 Steam Depot Enterprices, LLC