Products -  Cart -  Help -  Contact us   

Cybertor MCU5 Steam Flow Computer

Cybertor MCU5 Steam Flow Computer
The Cybertor MicroCOMET Model MCU5 Steam Flow Computer is designed to compensate volumetric flow measurement of steam for varying pressure in the range from 1 to 3500 [psia] and the temperature in the range from 100 to 1600°F. both for saturated and superheated steam, to compute an accurate mass flow. Almost any flow-measuring device can be used as a primary element. The MCU5 single stream Flow Computer can accept up to three flow inputs, which may be analog or pulse types. This feature enables accuracy to be improved by auto-ranging 'stacked' d/p cells.

    * Even better measurement accuracy can be achieved by using 'tube switching' where the MCU5 automatically selects the measuring run which gives the optimum accuracy dependent on flow-rate. The inputs may also be summed or subtracted. For the general case, density is corrected based on temperature and pressure and the MCU5 also calculates the degree of superheat, which can be displayed and alarmed.

    * The MCU5 can be programmed for saturated steam where only pressure or temperature measurement is required and the other value is computed from stored curves.

    * The MCU5 is available for panel, or surface mounting (NEMA 4 enclosure)
Specification Sheet
 
Mounting
Flow Inputs
Power Supply
Temperature Inputs
Pressure Inputs
Density Input
Mass Flow Ouput
Alarm Outputs
Communication Port
Transmitter Power
External Totalizer Dry Contact Output
Factory Calibration
In Stock Quantity:
Price: $1,205.00